Search Sanctioned Goods & HS Codes

10K+ items found

‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’, which remain ‘superconductive’ above 115 K (– 158,16 °C). Technical note : For the purposes of the item above, ‘filaments’ may be in wire, cylinder, film, tape or ribbon form.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: IX.A1.010
Code: 1C005
‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’, which remain ‘superconductive’ above 115 K (– 158,16 °C). Technical note : For the purposes of the item above, ‘filaments’ may be in wire, cylinder, film, tape or ribbon form.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: IX.A1.010
Code: 1C005
Materials specially designed for use as absorbers of electromagnetic waves, or intrinsically conductive polymers, as follows: (a) Intrinsically conductive polymeric materials with a ‘bulk electrical conductivity’ exceeding 10 000 S/m (Siemens per metre) or a ‘sheet (surface) resistivity’ of less than 100 ohms/square, based on any of the following polymers: 1. Polyaniline; 2. Polypyrrole; 3. Polythiophene; 4. Poly phenylene-vinylene; or 5. Poly thienylene-vinylene. Technical note : ‘Bulk electrical conductivity’ and ‘sheet (surface) resistivity’ should be determined using ASTM D-257 or national equivalents.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: IX.A1.009
Code: 1C001
Materials specially designed for use as absorbers of electromagnetic waves, or intrinsically conductive polymers, as follows: (a) Intrinsically conductive polymeric materials with a ‘bulk electrical conductivity’ exceeding 10 000 S/m (Siemens per metre) or a ‘sheet (surface) resistivity’ of less than 100 ohms/square, based on any of the following polymers: 1. Polyaniline; 2. Polypyrrole; 3. Polythiophene; 4. Poly phenylene-vinylene; or 5. Poly thienylene-vinylene. Technical note : ‘Bulk electrical conductivity’ and ‘sheet (surface) resistivity’ should be determined using ASTM D-257 or national equivalents.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: IX.A1.009
Code: 1C001
Equipment for the production or inspection of ‘composite’ structures or laminates or ‘fibrous or filamentary materials’ as follows, and specially designed components and accessories therefor: (a) ‘Tow-placement machines’, of which the motions for positioning and laying tows are coordinated and programmed in two or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ airframe or missile structures.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: IX.A1.006
Code: 1B001
Equipment for the production or inspection of ‘composite’ structures or laminates or ‘fibrous or filamentary materials’ as follows, and specially designed components and accessories therefor: (a) ‘Tow-placement machines’, of which the motions for positioning and laying tows are coordinated and programmed in two or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ airframe or missile structures.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: IX.A1.006
Code: 1B001
Protective and detection equipment and components, not specially designed for military use, as follows: (a) Full face masks, filter canisters, protective suits, gloves and shoes, detection systems and decontamination equipment specially designed or modified for defence against any of the following: 1. ‘Biological agents’; 2. ‘Radioactive materials’; or 3. Chemical warfare (CW) agents.
Authority: EU
Prohibited Supply To: IRKPSY
Program: KP
EU Code: IX.A1.003
Code: 1A004
Protective and detection equipment and components, not specially designed for military use, as follows: (a) Full face masks, filter canisters, protective suits, gloves and shoes, detection systems and decontamination equipment specially designed or modified for defence against any of the following: 1. ‘Biological agents’; 2. ‘Radioactive materials’; or 3. Chemical warfare (CW) agents.
Authority: EU
Prohibited Supply To: IRKPSY
Program: KP
EU Code: IX.A1.003
Code: 1A004
Manned, tethered submersible vehicles designed to operate at depths exceeding 1 000 m.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.005
Code: 8A001
Manned, tethered submersible vehicles designed to operate at depths exceeding 1 000 m.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.005
Code: 8A001
Stirling cycle engine air independent power systems having all of the following: (a) Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; and (b) Specially designed exhaust systems which discharge the products of combustion against a pressure of 100 kPa or more;
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.004
Code: 8A002
Stirling cycle engine air independent power systems having all of the following: (a) Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; and (b) Specially designed exhaust systems which discharge the products of combustion against a pressure of 100 kPa or more;
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.004
Code: 8A002
Fuel cell air independent power systems with an output exceeding 2kW and having any of the following: (a) Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; or (b) Systems having all of the following: 1. Specially designed to pressurise the products of reaction or for fuel reformation; 2. Specially designed to store the products of the reaction; and 3. Specially designed to discharge the products of the reaction against a pressure of 100 kPa or more
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.003
Code: 8A002
Fuel cell air independent power systems with an output exceeding 2kW and having any of the following: (a) Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; or (b) Systems having all of the following: 1. Specially designed to pressurise the products of reaction or for fuel reformation; 2. Specially designed to store the products of the reaction; and 3. Specially designed to discharge the products of the reaction against a pressure of 100 kPa or more
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.003
Code: 8A002
Diesel cycle engine air independent systems having all of the following: (a) Chemical scrubber or absorber systems, specially designed to remove carbon dioxide, carbon monoxide and particulates from recirculated engine exhaust; (b) Systems specially designed to use a monoatomic gas; (c) Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; and (d) Specially designed exhaust systems that do not exhaust continuously the products of combustion;
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.002
Code: 8A002
Diesel cycle engine air independent systems having all of the following: (a) Chemical scrubber or absorber systems, specially designed to remove carbon dioxide, carbon monoxide and particulates from recirculated engine exhaust; (b) Systems specially designed to use a monoatomic gas; (c) Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; and (d) Specially designed exhaust systems that do not exhaust continuously the products of combustion;
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.002
Code: 8A002
Air independent power systems specially designed for underwater use, as follows: (a) Brayton or Rankine cycle engine air independent power systems having any of the following: 1. Chemical scrubber or absorber systems, specially designed to remove carbon dioxide, carbon monoxide and particulates from recirculated engine exhaust; 2. Systems specially designed to use a monoatomic gas; 3. Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; or 4. Systems having all of the following: a. Specially designed to pressurise the products of reaction or for fuel reformation; b. Specially designed to store the products of the reaction; and c. Specially designed to discharge the products of the reaction against a pressure of 100 kPa or more;
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.001
Code: 8A002
Air independent power systems specially designed for underwater use, as follows: (a) Brayton or Rankine cycle engine air independent power systems having any of the following: 1. Chemical scrubber or absorber systems, specially designed to remove carbon dioxide, carbon monoxide and particulates from recirculated engine exhaust; 2. Systems specially designed to use a monoatomic gas; 3. Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; or 4. Systems having all of the following: a. Specially designed to pressurise the products of reaction or for fuel reformation; b. Specially designed to store the products of the reaction; and c. Specially designed to discharge the products of the reaction against a pressure of 100 kPa or more;
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A8.001
Code: 8A002
Optical control equipment as follows: (a) Equipment specially designed to maintain the surface figure or orientation of the ‘space-qualified’ components specified above. (b) Steering, tracking, stabilization and resonator alignment equipment as follows: 1. Beam steering mirror stages designed to carry mirrors having diameter or major axis length greater than 50 mm and having all of the following, and specially designed electronic control equipment therefor: a. A maximum angular travel of ±26 mrad or more; b. A mechanical resonant frequency of 500 Hz or more; and c. An angular ‘accuracy’ of 10 μrad (microradians) or less (better); 2. Resonator alignment equipment having bandwidths equal to or more than 100 Hz and an accuracy of 10 μrad or less (better); (c) Gimbals having all of the following: 1. A maximum slew exceeding 5°; 2. A bandwidth of 100 Hz or more; 3. Angular pointing errors of 200 μrad (microradians) or less; and 4. Having any of the following: a. Exceeding 0,15 m but not exceeding 1 m in diameter or major axis length and capable of angular accelerations exceeding 2 rad (radians)/s 2 ; or b. Exceeding 1 m in diameter or major axis length and capable of angular accelerations exceeding 0,5 rad (radians)/s 2 .
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.007
Code: 6A004
Optical control equipment as follows: (a) Equipment specially designed to maintain the surface figure or orientation of the ‘space-qualified’ components specified above. (b) Steering, tracking, stabilization and resonator alignment equipment as follows: 1. Beam steering mirror stages designed to carry mirrors having diameter or major axis length greater than 50 mm and having all of the following, and specially designed electronic control equipment therefor: a. A maximum angular travel of ±26 mrad or more; b. A mechanical resonant frequency of 500 Hz or more; and c. An angular ‘accuracy’ of 10 μrad (microradians) or less (better); 2. Resonator alignment equipment having bandwidths equal to or more than 100 Hz and an accuracy of 10 μrad or less (better); (c) Gimbals having all of the following: 1. A maximum slew exceeding 5°; 2. A bandwidth of 100 Hz or more; 3. Angular pointing errors of 200 μrad (microradians) or less; and 4. Having any of the following: a. Exceeding 0,15 m but not exceeding 1 m in diameter or major axis length and capable of angular accelerations exceeding 2 rad (radians)/s 2 ; or b. Exceeding 1 m in diameter or major axis length and capable of angular accelerations exceeding 0,5 rad (radians)/s 2 .
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.007
Code: 6A004
‘Space-qualified’ components for optical systems, as follows: (a) Components lightweighted to less than 20 % ‘equivalent density’ compared with a solid blank of the same aperture and thickness; (b) Raw substrates, processed substrates having surface coatings (single-layer or multi-layer, metallic or dielectric, conducting, semiconducting or insulating) or having protective films; (c) Segments or assemblies of mirrors designed to be assembled in space into an optical system with a collecting aperture equivalent to or larger than a single optic 1 m in diameter; (d) Components manufactured from ‘composite’ materials having a coefficient of linear thermal expansion equal to or less than 5 × 10 – 6 in any coordinate direction;
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.006
Code: 6A004
‘Space-qualified’ components for optical systems, as follows: (a) Components lightweighted to less than 20 % ‘equivalent density’ compared with a solid blank of the same aperture and thickness; (b) Raw substrates, processed substrates having surface coatings (single-layer or multi-layer, metallic or dielectric, conducting, semiconducting or insulating) or having protective films; (c) Segments or assemblies of mirrors designed to be assembled in space into an optical system with a collecting aperture equivalent to or larger than a single optic 1 m in diameter; (d) Components manufactured from ‘composite’ materials having a coefficient of linear thermal expansion equal to or less than 5 × 10 – 6 in any coordinate direction;
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.006
Code: 6A004
Bottom or bay-cable hydrophone arrays having any of the following: (a) Incorporating hydrophones specified in VII.A6.002 or a hydrophone with a hydrophone sensitivity better than 180 dB at any depth with no acceleration. (b) Incorporating multiplexed hydrophone group signal modules having all of the following characteristics: 1. Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m; and 2. Capable of being operationally interchanged with towed acoustic hydrophone array modules; or (c) Incorporating accelerometer based hydro-acoustic sensors. Technical note: Accelerometer-based hydro-acoustic sensors having all of the following: 1. Composed of three accelerometers arranged along three distinct axes; 2. Having an overall ‘acceleration sensitivity’ better than 48 dB (reference 1 000 mV rms per 1g); 3. Designed to operate at depths greater than 35 metres; and 4. Operating frequency below 20 kHz. Notes: 1. Does not apply to particle velocity sensors or geophones. 2. Also applies to receiving equipment, whether or not related in normal application to separate active equipment, and specially designed components therefor.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A6.004
Code: 6A001
Bottom or bay-cable hydrophone arrays having any of the following: (a) Incorporating hydrophones specified in VII.A6.002 or a hydrophone with a hydrophone sensitivity better than 180 dB at any depth with no acceleration. (b) Incorporating multiplexed hydrophone group signal modules having all of the following characteristics: 1. Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m; and 2. Capable of being operationally interchanged with towed acoustic hydrophone array modules; or (c) Incorporating accelerometer based hydro-acoustic sensors. Technical note: Accelerometer-based hydro-acoustic sensors having all of the following: 1. Composed of three accelerometers arranged along three distinct axes; 2. Having an overall ‘acceleration sensitivity’ better than 48 dB (reference 1 000 mV rms per 1g); 3. Designed to operate at depths greater than 35 metres; and 4. Operating frequency below 20 kHz. Notes: 1. Does not apply to particle velocity sensors or geophones. 2. Also applies to receiving equipment, whether or not related in normal application to separate active equipment, and specially designed components therefor.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A6.004
Code: 6A001
Heading sensors having all of the following: (a) An ‘accuracy’ of better than 0,5°; and (b) Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m;
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A6.003
Code: 6A001
Heading sensors having all of the following: (a) An ‘accuracy’ of better than 0,5°; and (b) Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m;
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A6.003
Code: 6A001
Towed acoustic hydrophone arrays having any of the following: (a) Hydrophone group spacing of less than 12,5 m or ‘able to be modified’ to have hydrophone group spacing of less than 12,5 m; (b) Designed or ‘able to be modified’ to operate at depths exceeding 35 m; (c) Heading sensors specified in VII.A6.003 (d) Longitudinally reinforced array hoses; (e) An assembled array of less than 40 mm in diameter; (f) Hydrophone characteristics specified in (a) above or a hydrophone with a hydrophone sensitivity better than 180 dB at any depth with no acceleration, or (g) Accelerometer-based hydro-acoustic with the following: 1. Composed of three accelerometers arranged along three distinct axes; 2. Having an overall ‘acceleration sensitivity’ better than 48 dB (reference 1 000 mV rms per 1g); 3. Designed to operate at depths greater than 35 metres; and 4. Operating frequency below 20 kHz.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A6.002
Code: 6A001
Towed acoustic hydrophone arrays having any of the following: (a) Hydrophone group spacing of less than 12,5 m or ‘able to be modified’ to have hydrophone group spacing of less than 12,5 m; (b) Designed or ‘able to be modified’ to operate at depths exceeding 35 m; (c) Heading sensors specified in VII.A6.003 (d) Longitudinally reinforced array hoses; (e) An assembled array of less than 40 mm in diameter; (f) Hydrophone characteristics specified in (a) above or a hydrophone with a hydrophone sensitivity better than 180 dB at any depth with no acceleration, or (g) Accelerometer-based hydro-acoustic with the following: 1. Composed of three accelerometers arranged along three distinct axes; 2. Having an overall ‘acceleration sensitivity’ better than 48 dB (reference 1 000 mV rms per 1g); 3. Designed to operate at depths greater than 35 metres; and 4. Operating frequency below 20 kHz.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A6.002
Code: 6A001
Hydrophones having any of the following: (a) Incorporating continuous flexible sensing elements (b) Incorporating flexible assemblies of discrete sensing elements with either a diameter or length less than 20 mm and with a separation between elements of less than 20 mm; (c) Having any of the following sensing elements: 1. Optical fibres; 2. ‘Piezoelectric polymer’ films other than polyvinylidene-fluoride (PVDF) and its co-polymers {P(VDF-TrFE) and P(VDF-TFE)}; 3. ‘Flexible piezoelectric composites’ 4. Lead-magnesium-niobate/lead-titanate (i.e., Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 , or PMN-PT) piezoelectric single crystals grown from solid solution; or 5. Lead-indium-niobate/lead-magnesium niobate/lead-titanate (i.e., Pb(In 1/2 Nb 1/2 )O 3 –Pb(Mg 1/3 Nb 2/3 )O 3 –PbTiO 3 , or PIN-PMN-PT) piezoelectric single crystals grown from solid solution; (d) Designed to operate at depths exceeding 35 m with acceleration compensation; or (e) Designed for operation at depths exceeding 1 000 m. Note : The status of hydrophones specially designed for other equipment is determined by the status of the other equipment.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A6.001
Code: 6A001
Hydrophones having any of the following: (a) Incorporating continuous flexible sensing elements (b) Incorporating flexible assemblies of discrete sensing elements with either a diameter or length less than 20 mm and with a separation between elements of less than 20 mm; (c) Having any of the following sensing elements: 1. Optical fibres; 2. ‘Piezoelectric polymer’ films other than polyvinylidene-fluoride (PVDF) and its co-polymers {P(VDF-TrFE) and P(VDF-TFE)}; 3. ‘Flexible piezoelectric composites’ 4. Lead-magnesium-niobate/lead-titanate (i.e., Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 , or PMN-PT) piezoelectric single crystals grown from solid solution; or 5. Lead-indium-niobate/lead-magnesium niobate/lead-titanate (i.e., Pb(In 1/2 Nb 1/2 )O 3 –Pb(Mg 1/3 Nb 2/3 )O 3 –PbTiO 3 , or PIN-PMN-PT) piezoelectric single crystals grown from solid solution; (d) Designed to operate at depths exceeding 35 m with acceleration compensation; or (e) Designed for operation at depths exceeding 1 000 m. Note : The status of hydrophones specially designed for other equipment is determined by the status of the other equipment.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A6.001
Code: 6A001
Telecommunication systems and equipment, and specially designed components and accessories therefor, having any of the following characteristics, functions or features: (a) Specially designed to have any of the following: 1. User programmable spreading codes; or 2. A total transmitted bandwidth which is 100 or more times the bandwidth of any one information channel and in excess of 50 kHz. Note : Does not apply to radio equipment specially designed for use with any of the following: (a) Civil cellular radio-communications systems; or (b) Fixed or mobile satellite earth stations for commercial civil telecommunications. (b) Being digitally controlled radio receivers having all of the following: 1. More than 1 000 channels; 2. A ‘channel switching time’ of less than 1 ms; 3. Automatic searching or scanning of a part of the electromagnetic spectrum; and 4. Identification of the received signals or the type of transmitter. Note : Does not apply to radio equipment specially designed for use with civil cellular radio-communications systems. Technical note: ‘Channel switching time’: the time (i.e., delay) to change from one receiving frequency to another, to arrive at or within ± 0,05 % of the final specified receiving frequency. Items having a specified frequency range of less than ± 0,05 % around their centre frequency are defined to be incapable of channel frequency switching.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A5.001
Code: 5A001
Telecommunication systems and equipment, and specially designed components and accessories therefor, having any of the following characteristics, functions or features: (a) Specially designed to have any of the following: 1. User programmable spreading codes; or 2. A total transmitted bandwidth which is 100 or more times the bandwidth of any one information channel and in excess of 50 kHz. Note : Does not apply to radio equipment specially designed for use with any of the following: (a) Civil cellular radio-communications systems; or (b) Fixed or mobile satellite earth stations for commercial civil telecommunications. (b) Being digitally controlled radio receivers having all of the following: 1. More than 1 000 channels; 2. A ‘channel switching time’ of less than 1 ms; 3. Automatic searching or scanning of a part of the electromagnetic spectrum; and 4. Identification of the received signals or the type of transmitter. Note : Does not apply to radio equipment specially designed for use with civil cellular radio-communications systems. Technical note: ‘Channel switching time’: the time (i.e., delay) to change from one receiving frequency to another, to arrive at or within ± 0,05 % of the final specified receiving frequency. Items having a specified frequency range of less than ± 0,05 % around their centre frequency are defined to be incapable of channel frequency switching.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A5.001
Code: 5A001
‘Fibrous or filamentary materials’ as follows: (a) Organic ‘fibrous or filamentary materials’, having all of the following: 1. ‘specific modulus’ exceeding 12,7 × 10 6 m; and 2. ‘specific tensile strength’ exceeding 23,5 × 10 4 m; (b) Carbon ‘fibrous or filamentary materials’, having all of the following: 1. ‘specific modulus’ exceeding 14,65 × 10 6 m; and 2. ‘specific tensile strength’ exceeding 26,82 × 10 4 m; (c) Inorganic ‘fibrous or filamentary materials’, having all of the following: 1. ‘Specific modulus’ exceeding 2,54 × 10 6 m; and 2. Melting, softening, decomposition or sublimation point exceeding 1 649 °C in an inert environment (d) ‘Fibrous or filamentary materials’, having any of the following: 1. Composed of any of the following: a. Polyetherimides specified in VII.A1.010 b. Other materials specified in VII.A1.010 2. Composed of materials specified above and commingled with other fibres specified in VII.A1.012. (e) Fully or partially resin-impregnated or pitch-impregnated fibrous or filamentary materials (prepregs), metal or carbon-coated ‘fibrous or filamentary materials’ (preforms) or carbon fibre preforms, having all of the following: 1. Having any of the following: a. Inorganic ‘fibrous or filamentary materials’ specified above b. Organic or carbon ‘fibrous or filamentary materials’, having all of the following: 1. ‘Specific modulus’ exceeding 10,15 × 10 6 m; and 2. ‘Specific tensile strength’ exceeding 17,7 × 10 4 m; and 2. Having any of the following: a. Resin or pitch, specified in previous sections; b. ‘Dynamic Mechanical Analysis glass transition temperature (DMA Tg)’ equal to or exceeding 180 °C and having a phenolic resin; or c. ‘Dynamic Mechanical Analysis glass transition temperature (DMA Tg)’ equal to or exceeding 232 °C and having a resin or pitch, not specified earlier and not being a phenolic resin. Notes: 1. Does not apply to polyethylene. 2. Does not apply to ‘fibrous or filamentary materials’, for the repair of ‘civil aircraft’ structures or laminates, having all of the following: (a) An area not exceeding 1 m 2 ; (b) A length not exceeding 2,5 m; and (c) A width exceeding 15 mm. Or to mechanically chopped, milled or cut carbon ‘fibrous or filamentary materials’ 25,0 mm or less in length. 3. Does not apply to the following: (a) Discontinuous, multiphase, polycrystalline alumina fibres in chopped fibre or random mat form, containing 3 % by weight or more silica, with a ‘specific modulus’ of less than 10 × 10 6 m; (b) Molybdenum and molybdenum alloy fibres; (c) Boron fibres; (d) Discontinuous ceramic fibres with a melting, softening, decomposition or sublimation point lower than 2 043 K (1 770 °C) in an inert environment. 4. Does not apply to: (a) Epoxy resin ‘matrix’ impregnated carbon ‘fibrous or filamentary materials’ (prepregs) for the repair of ‘civil aircraft’ structures or laminates, having all of the following; 1. An area not exceeding 1 m 2 ; 2. A length not exceeding 2,5 m; and 3. A width exceeding 15 mm. (b) Fully or partially resin-impregnated or pitch-impregnated mechanically chopped, milled or cut carbon ‘fibrous or filamentary materials’ 25,0 mm or less in length when using a resin or pitch other than those specified previously.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.012
Code: 1C010
‘Fibrous or filamentary materials’ as follows: (a) Organic ‘fibrous or filamentary materials’, having all of the following: 1. ‘specific modulus’ exceeding 12,7 × 10 6 m; and 2. ‘specific tensile strength’ exceeding 23,5 × 10 4 m; (b) Carbon ‘fibrous or filamentary materials’, having all of the following: 1. ‘specific modulus’ exceeding 14,65 × 10 6 m; and 2. ‘specific tensile strength’ exceeding 26,82 × 10 4 m; (c) Inorganic ‘fibrous or filamentary materials’, having all of the following: 1. ‘Specific modulus’ exceeding 2,54 × 10 6 m; and 2. Melting, softening, decomposition or sublimation point exceeding 1 649 °C in an inert environment (d) ‘Fibrous or filamentary materials’, having any of the following: 1. Composed of any of the following: a. Polyetherimides specified in VII.A1.010 b. Other materials specified in VII.A1.010 2. Composed of materials specified above and commingled with other fibres specified in VII.A1.012. (e) Fully or partially resin-impregnated or pitch-impregnated fibrous or filamentary materials (prepregs), metal or carbon-coated ‘fibrous or filamentary materials’ (preforms) or carbon fibre preforms, having all of the following: 1. Having any of the following: a. Inorganic ‘fibrous or filamentary materials’ specified above b. Organic or carbon ‘fibrous or filamentary materials’, having all of the following: 1. ‘Specific modulus’ exceeding 10,15 × 10 6 m; and 2. ‘Specific tensile strength’ exceeding 17,7 × 10 4 m; and 2. Having any of the following: a. Resin or pitch, specified in previous sections; b. ‘Dynamic Mechanical Analysis glass transition temperature (DMA Tg)’ equal to or exceeding 180 °C and having a phenolic resin; or c. ‘Dynamic Mechanical Analysis glass transition temperature (DMA Tg)’ equal to or exceeding 232 °C and having a resin or pitch, not specified earlier and not being a phenolic resin. Notes: 1. Does not apply to polyethylene. 2. Does not apply to ‘fibrous or filamentary materials’, for the repair of ‘civil aircraft’ structures or laminates, having all of the following: (a) An area not exceeding 1 m 2 ; (b) A length not exceeding 2,5 m; and (c) A width exceeding 15 mm. Or to mechanically chopped, milled or cut carbon ‘fibrous or filamentary materials’ 25,0 mm or less in length. 3. Does not apply to the following: (a) Discontinuous, multiphase, polycrystalline alumina fibres in chopped fibre or random mat form, containing 3 % by weight or more silica, with a ‘specific modulus’ of less than 10 × 10 6 m; (b) Molybdenum and molybdenum alloy fibres; (c) Boron fibres; (d) Discontinuous ceramic fibres with a melting, softening, decomposition or sublimation point lower than 2 043 K (1 770 °C) in an inert environment. 4. Does not apply to: (a) Epoxy resin ‘matrix’ impregnated carbon ‘fibrous or filamentary materials’ (prepregs) for the repair of ‘civil aircraft’ structures or laminates, having all of the following; 1. An area not exceeding 1 m 2 ; 2. A length not exceeding 2,5 m; and 3. A width exceeding 15 mm. (b) Fully or partially resin-impregnated or pitch-impregnated mechanically chopped, milled or cut carbon ‘fibrous or filamentary materials’ 25,0 mm or less in length when using a resin or pitch other than those specified previously.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.012
Code: 1C010
Full face-mask air-purifying and air-supplying respirators except those used in breathing apparatus for firefighters
Authority: EU
Prohibited Supply To: IRKPSY
Program: KP
EU Code: VI.A1.009
Code: 1A004
Full face-mask air-purifying and air-supplying respirators except those used in breathing apparatus for firefighters
Authority: EU
Prohibited Supply To: IRKPSY
Program: KP
EU Code: VI.A1.009
Code: 1A004
High-speed imaging cameras except those used in medical imaging systems
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: V.A6.001
Code: 6A003
High-speed imaging cameras except those used in medical imaging systems
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: V.A6.001
Code: 6A003
Electrical Discharge Machines (EDMs)
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: V.A2.003
Code: 2B001
Electrical Discharge Machines (EDMs)
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: V.A2.003
Code: 2B001

Search sanctioned goods across UK and EU export control lists in one place. This tool covers dual-use items, military equipment, and other restricted goods and technologies. Each entry includes the specific goods description, issuing authority, countries subject to import or export restrictions, and the relevant sanctions programme. This helps compliance and trade teams determine whether an item is subject to import or export prohibitions.

Use the filters to narrow results by authority, target state, or sanctions programme. Whether you’re checking a single HS code or reviewing an entire category, the sanctioned goods list is updated as new designations and programme consolidated changes are published.

Goods search

Search results

‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’, which remain ‘superconductive’ above 115 K (– 158,16 °C). Technical note : For the purposes of the item above, ‘filaments’ may be in wire, cylinder, film, tape or ribbon form.

‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’, which remain ‘superconductive’ above 115 K (– 158,16 °C). Technical note : For the purposes of the item above, ‘filaments’ may be in wire, cylinder, film, tape or ribbon form.

Manned, tethered submersible vehicles designed to operate at depths exceeding 1 000 m.

Manned, tethered submersible vehicles designed to operate at depths exceeding 1 000 m.

Heading sensors having all of the following: (a) An ‘accuracy’ of better than 0,5°; and (b) Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m;

Heading sensors having all of the following: (a) An ‘accuracy’ of better than 0,5°; and (b) Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m;

Full face-mask air-purifying and air-supplying respirators except those used in breathing apparatus for firefighters

Full face-mask air-purifying and air-supplying respirators except those used in breathing apparatus for firefighters

High-speed imaging cameras except those used in medical imaging systems

High-speed imaging cameras except those used in medical imaging systems

Electrical Discharge Machines (EDMs)

Electrical Discharge Machines (EDMs)

Filters

Search results

‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’, which remain ‘superconductive’ above 115 K (– 158,16 °C). Technical note : For the purposes of the item above, ‘filaments’ may be in wire, cylinder, film, tape or ribbon form.

‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’, which remain ‘superconductive’ above 115 K (– 158,16 °C). Technical note : For the purposes of the item above, ‘filaments’ may be in wire, cylinder, film, tape or ribbon form.

Manned, tethered submersible vehicles designed to operate at depths exceeding 1 000 m.

Manned, tethered submersible vehicles designed to operate at depths exceeding 1 000 m.

Heading sensors having all of the following: (a) An ‘accuracy’ of better than 0,5°; and (b) Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m;

Heading sensors having all of the following: (a) An ‘accuracy’ of better than 0,5°; and (b) Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m;

Full face-mask air-purifying and air-supplying respirators except those used in breathing apparatus for firefighters

Full face-mask air-purifying and air-supplying respirators except those used in breathing apparatus for firefighters

High-speed imaging cameras except those used in medical imaging systems

High-speed imaging cameras except those used in medical imaging systems

Electrical Discharge Machines (EDMs)

Electrical Discharge Machines (EDMs)