Search Sanctioned Goods & HS Codes

10K+ items found

‘Compensation systems’ for the following: (a) ‘Magnetometers’ using optically pumped or nuclear precession (proton/ Overhauser) ‘technology’ having a ‘sensitivity’ lower (better) than 20 pT (rms) per square root Hz at a frequency of 1 Hz, and using optically pumped or nuclear precession (proton/Overhauser) ‘technology’ that will permit these sensors to realize a ‘sensitivity’ lower (better) than 2 pT rms per square root Hz. (b) Underwater electric field sensors having a ‘sensitivity’ lower (better) than 8 nanovolt per meter per square root Hz when measured at 1 Hz. (c) ‘Magnetic gradiometers’ specified in VII.A6.010 that will permit these sensors to realize a ‘sensitivity’ lower (better) than 3 pT/m rms per square root H Note: Fibre optic ‘intrinsic magnetic gradiometers’ having a magnetic gradient field ‘sensitivity’ lower (better) than 0,3 nT/m (rms) per square root Hz; ‘Intrinsic magnetic gradiometers’, using ‘technology’ other than fibre-optic ‘technology’, having a magnetic gradient field ‘sensitivity’ lower (better) than 0,015 nT/m (rms) per square root Hz.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.011
Code: 6A006
‘Compensation systems’ for the following: (a) ‘Magnetometers’ using optically pumped or nuclear precession (proton/ Overhauser) ‘technology’ having a ‘sensitivity’ lower (better) than 20 pT (rms) per square root Hz at a frequency of 1 Hz, and using optically pumped or nuclear precession (proton/Overhauser) ‘technology’ that will permit these sensors to realize a ‘sensitivity’ lower (better) than 2 pT rms per square root Hz. (b) Underwater electric field sensors having a ‘sensitivity’ lower (better) than 8 nanovolt per meter per square root Hz when measured at 1 Hz. (c) ‘Magnetic gradiometers’ specified in VII.A6.010 that will permit these sensors to realize a ‘sensitivity’ lower (better) than 3 pT/m rms per square root H Note: Fibre optic ‘intrinsic magnetic gradiometers’ having a magnetic gradient field ‘sensitivity’ lower (better) than 0,3 nT/m (rms) per square root Hz; ‘Intrinsic magnetic gradiometers’, using ‘technology’ other than fibre-optic ‘technology’, having a magnetic gradient field ‘sensitivity’ lower (better) than 0,015 nT/m (rms) per square root Hz.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.011
Code: 6A006
‘Magnetic gradiometers’ using multiple ‘magnetometers’ specified in VII.A6;
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.010
Code: 6A006
‘Magnetic gradiometers’ using multiple ‘magnetometers’ specified in VII.A6;
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.010
Code: 6A006
‘Magnetometers’ using optically pumped or nuclear precession (proton/Overhauser) ‘technology’ having a ‘sensitivity’ lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz;
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.009
Code: 6A006
‘Magnetometers’ using optically pumped or nuclear precession (proton/Overhauser) ‘technology’ having a ‘sensitivity’ lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz;
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.009
Code: 6A006
‘Magnetometers’ using superconductive technology (SQUID) and having any of the following: (a) SQUID systems designed for stationary operation, without specially designed subsystems designed to reduce in-motion noise, and having a ‘sensitivity’ equal to or lower (better) than 50 fT (rms) per square root Hz at a frequency of 1 Hz; or (b) SQUID systems having an in-motion-magnetometer ‘sensitivity’ lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz and specially designed to reduce in-
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.008
Code: 6A006
‘Magnetometers’ using superconductive technology (SQUID) and having any of the following: (a) SQUID systems designed for stationary operation, without specially designed subsystems designed to reduce in-motion noise, and having a ‘sensitivity’ equal to or lower (better) than 50 fT (rms) per square root Hz at a frequency of 1 Hz; or (b) SQUID systems having an in-motion-magnetometer ‘sensitivity’ lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz and specially designed to reduce in-
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.008
Code: 6A006
‘Monospectral imaging sensors’ and ‘multispectral imaging sensors’, designed for remote sensing applications and having any of the following: (a) An Instantaneous-Field-Of-View (IFOV) of less than 200 μrad (microradians); or (b) Specified for operation in the wavelength range exceeding 400 nm but not exceeding 30 000 nm and having all the following; 1. Providing output imaging data in digital format; and 2. Having any of the following characteristics: a. ‘Space-qualified’; or b. Designed for airborne operation, using other than silicon detectors, and having an IFOV of less than 2,5 mrad (milliradians); Note : Does not apply to monospectral imaging sensors' with a peak response in the wavelength range exceeding 300 nm but not exceeding 900 nm and only incorporating any of the following non ‘space-qualified’ detectors or non-‘space-qualified’‘focal plane arrays’: (a) Charge Coupled Devices not designed or modified to achieve ‘charge multiplication’; or (b) Complementary Metal Oxide Semiconductor devices not designed or modified to achieve ‘charge multiplication’.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.005
Code: 6A002
‘Monospectral imaging sensors’ and ‘multispectral imaging sensors’, designed for remote sensing applications and having any of the following: (a) An Instantaneous-Field-Of-View (IFOV) of less than 200 μrad (microradians); or (b) Specified for operation in the wavelength range exceeding 400 nm but not exceeding 30 000 nm and having all the following; 1. Providing output imaging data in digital format; and 2. Having any of the following characteristics: a. ‘Space-qualified’; or b. Designed for airborne operation, using other than silicon detectors, and having an IFOV of less than 2,5 mrad (milliradians); Note : Does not apply to monospectral imaging sensors' with a peak response in the wavelength range exceeding 300 nm but not exceeding 900 nm and only incorporating any of the following non ‘space-qualified’ detectors or non-‘space-qualified’‘focal plane arrays’: (a) Charge Coupled Devices not designed or modified to achieve ‘charge multiplication’; or (b) Complementary Metal Oxide Semiconductor devices not designed or modified to achieve ‘charge multiplication’.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A6.005
Code: 6A002
Telecommunication test, inspection and production equipment and specially designed components or accessories therefor, specially designed for the ‘development’ or ‘production’ of telecommunication equipment, functions or features. Note : Does not apply to optical fibre characterization equipment.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A5.002
Code: 5B002
Telecommunication test, inspection and production equipment and specially designed components or accessories therefor, specially designed for the ‘development’ or ‘production’ of telecommunication equipment, functions or features. Note : Does not apply to optical fibre characterization equipment.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A5.002
Code: 5B002
Electronic computers and related systems, equipment and components, or ‘electronic assemblies’ having any of the following: (a) Specially designed to have any of the following: 1. Radiation hardened to exceed any of the following specifications: a. Total dose 5 × 10 3 Gy (Si); b. Dose rate upset 5 × 10 6 Gy (Si)/s; or c. Single event upset 1 × 10 – 8 error/bit/day.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A4.001
Code: 4A001
Electronic computers and related systems, equipment and components, or ‘electronic assemblies’ having any of the following: (a) Specially designed to have any of the following: 1. Radiation hardened to exceed any of the following specifications: a. Total dose 5 × 10 3 Gy (Si); b. Dose rate upset 5 × 10 6 Gy (Si)/s; or c. Single event upset 1 × 10 – 8 error/bit/day.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A4.001
Code: 4A001
Body armour and components therefor, as follows: (a) Soft body armour not manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor; (b) Hard body armour plates providing ballistic protection equal to or less than level IIIA (NIJ 0101.06, July 2008) or national equivalents. Note : this paragraph does not apply to body armour when accompanying its user for the user's own personal protection, to body armour designed to provide frontal protection only from both fragment and blast from non-military explosive devices, and to body armour designed to provide protection only from knife, spike, needle or blunt trauma.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.014
Code: 1A005
Body armour and components therefor, as follows: (a) Soft body armour not manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor; (b) Hard body armour plates providing ballistic protection equal to or less than level IIIA (NIJ 0101.06, July 2008) or national equivalents. Note : this paragraph does not apply to body armour when accompanying its user for the user's own personal protection, to body armour designed to provide frontal protection only from both fragment and blast from non-military explosive devices, and to body armour designed to provide protection only from knife, spike, needle or blunt trauma.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.014
Code: 1A005
Metals and compounds, as follows: (a) Metals in particle sizes of less than 60 μm whether spherical, atomized, spheroidal, flaked or ground, manufactured from material consisting of 99 % or more of zirconium, magnesium and alloys thereof; (b) Boron or boron alloys, with a particle size of 60 μm or less, as follows: 1. Boron with a purity of 85 % by weight or more; 2. Boron alloys with a boron content of 85 % by weight or more; (c) Guanidine nitrate (CAS 506-93-4); (d) Nitroguanidine (NQ) (CAS 556-88-7) Note : The metals referred to here also refer to metals or alloys encapsulated in aluminium, magnesium, zirconium or beryllium.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.013
Code: 1C011
Metals and compounds, as follows: (a) Metals in particle sizes of less than 60 μm whether spherical, atomized, spheroidal, flaked or ground, manufactured from material consisting of 99 % or more of zirconium, magnesium and alloys thereof; (b) Boron or boron alloys, with a particle size of 60 μm or less, as follows: 1. Boron with a purity of 85 % by weight or more; 2. Boron alloys with a boron content of 85 % by weight or more; (c) Guanidine nitrate (CAS 506-93-4); (d) Nitroguanidine (NQ) (CAS 556-88-7) Note : The metals referred to here also refer to metals or alloys encapsulated in aluminium, magnesium, zirconium or beryllium.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.013
Code: 1C011
Unprocessed fluorinated compounds as follows: (a) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (b) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.011
Code: 1C009
Unprocessed fluorinated compounds as follows: (a) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (b) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.011
Code: 1C009
Non-fluorinated polymeric substances as follows: (a) Imides as follows: 1. Bismaleimides; 2. Aromatic polyamide-imides (PAI) having a ‘glass transition temperature (Tg)’ exceeding 290 °C; 3. Aromatic polyimides having a ‘glass transition temperature (Tg)’ exceeding 232 °C; 4. Aromatic polyetherimides having a ‘glass transition temperature (Tg)’ exceeding 290°C; (b) Polyarylene ketones; (c) Polyarylene sulphides, where the arylene group is biphenylene, triphenylene or combinations thereof; (d) Polybiphenylenethersulphone having a ‘glass transition temperature (Tg)’ exceeding 290°C. Note : Applies to the substances in liquid or solid ‘fusible’ form, including resin, powder, pellet, film, sheet, tape, or ribbon.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.010
Code: 1C008
Non-fluorinated polymeric substances as follows: (a) Imides as follows: 1. Bismaleimides; 2. Aromatic polyamide-imides (PAI) having a ‘glass transition temperature (Tg)’ exceeding 290 °C; 3. Aromatic polyimides having a ‘glass transition temperature (Tg)’ exceeding 232 °C; 4. Aromatic polyetherimides having a ‘glass transition temperature (Tg)’ exceeding 290°C; (b) Polyarylene ketones; (c) Polyarylene sulphides, where the arylene group is biphenylene, triphenylene or combinations thereof; (d) Polybiphenylenethersulphone having a ‘glass transition temperature (Tg)’ exceeding 290°C. Note : Applies to the substances in liquid or solid ‘fusible’ form, including resin, powder, pellet, film, sheet, tape, or ribbon.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.010
Code: 1C008
Ceramic powders, non-‘composite’ ceramic materials, ceramic-‘matrix’‘composite’ materials and precursor materials, as follows: (a) Ceramic powders of single or complex borides of titanium, having total metallic impurities, excluding intentional additions, of less than 5 000 ppm, an average particle size equal to or less than 5 μm and no more than 10 % of the particles larger than 10 μm; (b) Non-‘composite’ ceramic materials in crude or semi-fabricated form, composed of borides of titanium with a density of 98 % or more of the theoretical density; (c) Ceramic-ceramic ‘composite’ materials with a glass or oxide-‘matrix’ and reinforced with fibres having all of the following: 1. Made from any of the following materials: a. Si-N; b. Si-C; c. Si-A1-O-N; or d. Si-O-N; and 2. Having a ‘specific tensile strength’ exceeding 12,7 × 10 3 m (d) Ceramic-ceramic ‘composite’ materials, with or without a continuous metallic phase, incorporating particles, whiskers or fibres, where carbides or nitrides of silicon, zirconium or boron form the ‘matrix’; (e) Precursor materials (i.e., special purpose polymeric or metallo-organic materials) for producing any phase or phases of the materials specified above, as follows: 1. Polydiorganosilanes (for producing silicon carbide); 2. Polysilazanes (for producing silicon nitride); 3. Polycarbosilazanes (for producing ceramics with silicon, carbon and nitrogen components); (f) Ceramic-ceramic ‘composite’ materials with an oxide or glass ‘matrix’ reinforced with continuous fibres from any of the following systems: 1. Al 2 O 3 (CAS 1344-28-1); or 2. Si-C-N. Notes: 1. Does not apply to abrasives. 2. Does not apply to ‘composites’ containing fibres from these systems with a fibre ‘tensile strength’ of less than 700 MPa at 1 273 K (1 000 °C) or fibre tensile creep resistance of more than 1 per cent creep strain at 100 MPa load and 1 273 K (1 000 °C) for 100 hours.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.009
Code: 1C007
Ceramic powders, non-‘composite’ ceramic materials, ceramic-‘matrix’‘composite’ materials and precursor materials, as follows: (a) Ceramic powders of single or complex borides of titanium, having total metallic impurities, excluding intentional additions, of less than 5 000 ppm, an average particle size equal to or less than 5 μm and no more than 10 % of the particles larger than 10 μm; (b) Non-‘composite’ ceramic materials in crude or semi-fabricated form, composed of borides of titanium with a density of 98 % or more of the theoretical density; (c) Ceramic-ceramic ‘composite’ materials with a glass or oxide-‘matrix’ and reinforced with fibres having all of the following: 1. Made from any of the following materials: a. Si-N; b. Si-C; c. Si-A1-O-N; or d. Si-O-N; and 2. Having a ‘specific tensile strength’ exceeding 12,7 × 10 3 m (d) Ceramic-ceramic ‘composite’ materials, with or without a continuous metallic phase, incorporating particles, whiskers or fibres, where carbides or nitrides of silicon, zirconium or boron form the ‘matrix’; (e) Precursor materials (i.e., special purpose polymeric or metallo-organic materials) for producing any phase or phases of the materials specified above, as follows: 1. Polydiorganosilanes (for producing silicon carbide); 2. Polysilazanes (for producing silicon nitride); 3. Polycarbosilazanes (for producing ceramics with silicon, carbon and nitrogen components); (f) Ceramic-ceramic ‘composite’ materials with an oxide or glass ‘matrix’ reinforced with continuous fibres from any of the following systems: 1. Al 2 O 3 (CAS 1344-28-1); or 2. Si-C-N. Notes: 1. Does not apply to abrasives. 2. Does not apply to ‘composites’ containing fibres from these systems with a fibre ‘tensile strength’ of less than 700 MPa at 1 273 K (1 000 °C) or fibre tensile creep resistance of more than 1 per cent creep strain at 100 MPa load and 1 273 K (1 000 °C) for 100 hours.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.009
Code: 1C007
Fluids and lubricating materials, as follows: (a) Lubricating materials containing, as their principal ingredients, any of the following: 1. Phenylene or alkylphenylene ethers or thio-ethers, or their mixtures, containing more than two ether or thio-ether functions or mixtures thereof; or 2. Fluorinated silicone fluids with a kinematic viscosity of less than 5 000 mm 2 /s (5 000 centistokes) measured at 25 °C; (b) Damping or flotation fluids having all of the following: 1. Purity exceeding 99,8 %; 2. Containing less than 25 particles of 200 μm or larger in size per 3. 100 ml; and 4. Made from at least 85 % of any of the following: a. Dibromotetrafluoroethane (CAS 25497-30-7, 124-73-2, 27336-23-8); b. Polychlorotrifluoroethylene (oily and waxy modifications only); or c. Polybromotrifluoroethylene (c) Fluorocarbon electronic cooling fluids having all of the following: 1. Containing 85 % by weight or more of any of the following, or mixtures thereof: a. Monomeric forms of perfluoropolyalkylether-triazines or perfluoroaliphatic-ethers; b. Perfluoroalkylamines; c. Perfluorocycloalkanes; or d. Perfluoroalkanes e. Density at 298 K (25 °C) of 1,5 g/ml or more; f. In a liquid state at 273 K (0 °C); and g. Containing 60 % or more by weight of fluorine Note : Does not apply to materials specified and packages as medical products
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.008
Code: 1C006
Fluids and lubricating materials, as follows: (a) Lubricating materials containing, as their principal ingredients, any of the following: 1. Phenylene or alkylphenylene ethers or thio-ethers, or their mixtures, containing more than two ether or thio-ether functions or mixtures thereof; or 2. Fluorinated silicone fluids with a kinematic viscosity of less than 5 000 mm 2 /s (5 000 centistokes) measured at 25 °C; (b) Damping or flotation fluids having all of the following: 1. Purity exceeding 99,8 %; 2. Containing less than 25 particles of 200 μm or larger in size per 3. 100 ml; and 4. Made from at least 85 % of any of the following: a. Dibromotetrafluoroethane (CAS 25497-30-7, 124-73-2, 27336-23-8); b. Polychlorotrifluoroethylene (oily and waxy modifications only); or c. Polybromotrifluoroethylene (c) Fluorocarbon electronic cooling fluids having all of the following: 1. Containing 85 % by weight or more of any of the following, or mixtures thereof: a. Monomeric forms of perfluoropolyalkylether-triazines or perfluoroaliphatic-ethers; b. Perfluoroalkylamines; c. Perfluorocycloalkanes; or d. Perfluoroalkanes e. Density at 298 K (25 °C) of 1,5 g/ml or more; f. In a liquid state at 273 K (0 °C); and g. Containing 60 % or more by weight of fluorine Note : Does not apply to materials specified and packages as medical products
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.008
Code: 1C006
‘Superconductive’ composite conductors in lengths exceeding 100 m or with a mass exceeding 100 g, as follows: (a) ‘Superconductive’‘composite’ conductors containing one or more niobium-titanium ‘filaments’, having all of the following: 1. Embedded in a ‘matrix’ other than a copper or copper-based mixed ‘matrix’; and 2. Having a cross-section area less than 0,28x 10 – 4 mm 2 (6 μm in diameter for circular ‘filaments’); (b) ‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’ other than niobium-titanium, having all of the following: 1. A ‘critical temperature’ at zero magnetic induction exceeding – 263,31 °C; and 2. Remaining in the ‘superconductive’ state at a temperature of – 268,96 °C when exposed to a magnetic field oriented in any direction perpendicular to the longitudinal axis of conductor and corresponding to a magnetic induction of 12 T with critical current density exceeding 1 750 A/mm 2 on overall cross-section of the conductor. (c) ‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’, which remain ‘superconductive’ above – 158,16 °C
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.007
Code: 1C005
‘Superconductive’ composite conductors in lengths exceeding 100 m or with a mass exceeding 100 g, as follows: (a) ‘Superconductive’‘composite’ conductors containing one or more niobium-titanium ‘filaments’, having all of the following: 1. Embedded in a ‘matrix’ other than a copper or copper-based mixed ‘matrix’; and 2. Having a cross-section area less than 0,28x 10 – 4 mm 2 (6 μm in diameter for circular ‘filaments’); (b) ‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’ other than niobium-titanium, having all of the following: 1. A ‘critical temperature’ at zero magnetic induction exceeding – 263,31 °C; and 2. Remaining in the ‘superconductive’ state at a temperature of – 268,96 °C when exposed to a magnetic field oriented in any direction perpendicular to the longitudinal axis of conductor and corresponding to a magnetic induction of 12 T with critical current density exceeding 1 750 A/mm 2 on overall cross-section of the conductor. (c) ‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’, which remain ‘superconductive’ above – 158,16 °C
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.007
Code: 1C005
Uranium titanium alloys or tungsten alloys with a ‘matrix’ based on iron, nickel or copper, having all of the following: (a) A density exceeding 17,5 g/cm 3 ; (b) An elastic limit exceeding 880 MPa; (c) An ultimate tensile strength exceeding 1 270 MPa; and (d) An elongation exceeding 8 %.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.006
Code: 1C004
Uranium titanium alloys or tungsten alloys with a ‘matrix’ based on iron, nickel or copper, having all of the following: (a) A density exceeding 17,5 g/cm 3 ; (b) An elastic limit exceeding 880 MPa; (c) An ultimate tensile strength exceeding 1 270 MPa; and (d) An elongation exceeding 8 %.
Authority: EU
Prohibited Supply To: KP
Program: KP
EU Code: VII.A1.006
Code: 1C004
Magnetic metals, of all types and of whatever form, having any of the following: (a) Initial relative permeability of 120 000 or more and a thickness of 0,5 mm or less (b) Magnetostrictive alloys having any of the following: 1. A saturation magnetostriction of more than 5 × 10 – 4 ; or 2. A magnetomechanical coupling factor (k) of more than 0,8; or (c) Amorphous or ‘nanocrystalline’ alloy strips, having all of the following: 1. A composition having a minimum of 75 % by weight of iron, cobalt or nickel; 2. A saturation magnetic induction (Bs) of 1,6 T or more; and any of the following: a. A strip thickness of 0,02 mm or less; or b. An electrical resistivity of 2 × 10 – 4 ohm cm or more.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.005
Code: 1C003
Magnetic metals, of all types and of whatever form, having any of the following: (a) Initial relative permeability of 120 000 or more and a thickness of 0,5 mm or less (b) Magnetostrictive alloys having any of the following: 1. A saturation magnetostriction of more than 5 × 10 – 4 ; or 2. A magnetomechanical coupling factor (k) of more than 0,8; or (c) Amorphous or ‘nanocrystalline’ alloy strips, having all of the following: 1. A composition having a minimum of 75 % by weight of iron, cobalt or nickel; 2. A saturation magnetic induction (Bs) of 1,6 T or more; and any of the following: a. A strip thickness of 0,02 mm or less; or b. An electrical resistivity of 2 × 10 – 4 ohm cm or more.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.005
Code: 1C003
Metal alloys, metal alloy powder and alloyed materials including the following: (a) Aluminides, including: 1. Nickel aluminides containing a minimum of 15 % by weight aluminium, a maximum of 38 % by weight aluminium and at least one additional alloying element; 2. Titanium aluminides containing 10 % by weight or more aluminium and at least one additional alloying element. (b) Metal alloys made from the powder or particulate material including: 1. Nickel alloys having a stress-rupture life of 10 000 hours or longer at 650 °C at a stress of 676 MPa or a low cycle fatigue life of 10 000 cycles or more at 550 °C at a maximum stress of 1 095 MPa; 2. Niobium alloys having a stress-rupture life of 10 000 hours or longer at 800 °C at a stress of 400 MPa or a low cycle fatigue life of 10 000 cycles or more at 700 °C at a maximum stress of 700 MPa; 3. Titanium alloys having a stress-rupture life' of 10 000 hours or longer at 450 °C at a stress of 200 MPa or a low cycle fatigue life of 10 000 cycles or more at 450 °C at a maximum stress of 400 MPa; 4. Aluminium alloys having a tensile strength of 240 MPa or more at 200 °C or a tensile strength of 415 MPa or more at 25 °C; 5. Magnesium alloys having a tensile strength of 345 MPa or more and a corrosion rate of less than 1 mm/year in 3 % sodium chloride aqueous solution measured in accordance with ASTM standard G-31 or national equivalents; 6. Metal alloy powder or particulate material, having all of the following and made from any of the following composition systems: a. Nickel alloys (Ni-Al-X, Ni-X-Al) qualified for turbine engine parts or components, i.e. with less than 3 non-metallic particles (introduced during the manufacturing process) larger than 100 μm in 10 9 alloy particles b. Niobium alloys (Nb-Al-X or Nb-X-Al, Nb-Si-X or Nb-X-Si, Nb Ti X or Nb-X-Ti) c. Titanium alloys (Ti-Al-X or Ti-X-Al) d. Aluminium alloys (Al-Mg-X or Al-X-Mg, Al-Zn-X or Al-X-Zn, Al Fe-X or Al-X-Fe) or e. Magnesium alloys (Mg-Al-X or Mg-X-Al) 7. Made in a controlled environment by any of the following processes: a. ‘Vacuum atomization’ b. ‘Gas atomization’ c. ‘Rotary atomization’ d. ‘Splat quenching’ e. ‘Melt spinning and comminution’ Note: Unless provision to the contrary is made, the words ‘metals’ and ‘alloys’ cover crude and semi-fabricated forms. Crude forms: anodes, balls, bars (including notched bars and wire bars), billets, blocks, blooms, brickets, cakes, cathodes, crystals, cubes, dice, grains, granules, ingots, lumps, pellets, pigs, powder, rondelles, shot, slabs, slugs, sponge, sticks. Semi-fabricated forms: Wrought or worked materials fabricated by rolling, drawing, extruding, forging, impact extruding, pressing, graining, atomising, and grinding, i.e.: angles, channels, circles, discs, dust, flakes, foils and leaf, forging, plate, powder, pressings and stampings, ribbons, rings, rods (including bare welding rods, wire rods, and rolled wire), sections, shapes, sheets, strip, pipe and tubes (including tube rounds, squares, and hollows), drawn or extruded wire. Cast material produced by casting in sand, die, metal, plaster or other types of moulds, including high pressure castings, sintered forms, and forms made by powder metallurgy.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.004
Code: 1C202
Metal alloys, metal alloy powder and alloyed materials including the following: (a) Aluminides, including: 1. Nickel aluminides containing a minimum of 15 % by weight aluminium, a maximum of 38 % by weight aluminium and at least one additional alloying element; 2. Titanium aluminides containing 10 % by weight or more aluminium and at least one additional alloying element. (b) Metal alloys made from the powder or particulate material including: 1. Nickel alloys having a stress-rupture life of 10 000 hours or longer at 650 °C at a stress of 676 MPa or a low cycle fatigue life of 10 000 cycles or more at 550 °C at a maximum stress of 1 095 MPa; 2. Niobium alloys having a stress-rupture life of 10 000 hours or longer at 800 °C at a stress of 400 MPa or a low cycle fatigue life of 10 000 cycles or more at 700 °C at a maximum stress of 700 MPa; 3. Titanium alloys having a stress-rupture life' of 10 000 hours or longer at 450 °C at a stress of 200 MPa or a low cycle fatigue life of 10 000 cycles or more at 450 °C at a maximum stress of 400 MPa; 4. Aluminium alloys having a tensile strength of 240 MPa or more at 200 °C or a tensile strength of 415 MPa or more at 25 °C; 5. Magnesium alloys having a tensile strength of 345 MPa or more and a corrosion rate of less than 1 mm/year in 3 % sodium chloride aqueous solution measured in accordance with ASTM standard G-31 or national equivalents; 6. Metal alloy powder or particulate material, having all of the following and made from any of the following composition systems: a. Nickel alloys (Ni-Al-X, Ni-X-Al) qualified for turbine engine parts or components, i.e. with less than 3 non-metallic particles (introduced during the manufacturing process) larger than 100 μm in 10 9 alloy particles b. Niobium alloys (Nb-Al-X or Nb-X-Al, Nb-Si-X or Nb-X-Si, Nb Ti X or Nb-X-Ti) c. Titanium alloys (Ti-Al-X or Ti-X-Al) d. Aluminium alloys (Al-Mg-X or Al-X-Mg, Al-Zn-X or Al-X-Zn, Al Fe-X or Al-X-Fe) or e. Magnesium alloys (Mg-Al-X or Mg-X-Al) 7. Made in a controlled environment by any of the following processes: a. ‘Vacuum atomization’ b. ‘Gas atomization’ c. ‘Rotary atomization’ d. ‘Splat quenching’ e. ‘Melt spinning and comminution’ Note: Unless provision to the contrary is made, the words ‘metals’ and ‘alloys’ cover crude and semi-fabricated forms. Crude forms: anodes, balls, bars (including notched bars and wire bars), billets, blocks, blooms, brickets, cakes, cathodes, crystals, cubes, dice, grains, granules, ingots, lumps, pellets, pigs, powder, rondelles, shot, slabs, slugs, sponge, sticks. Semi-fabricated forms: Wrought or worked materials fabricated by rolling, drawing, extruding, forging, impact extruding, pressing, graining, atomising, and grinding, i.e.: angles, channels, circles, discs, dust, flakes, foils and leaf, forging, plate, powder, pressings and stampings, ribbons, rings, rods (including bare welding rods, wire rods, and rolled wire), sections, shapes, sheets, strip, pipe and tubes (including tube rounds, squares, and hollows), drawn or extruded wire. Cast material produced by casting in sand, die, metal, plaster or other types of moulds, including high pressure castings, sintered forms, and forms made by powder metallurgy.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.004
Code: 1C202
Metal alloys, metal alloy powder and alloyed materials including the following: (a) Aluminides, including: 1. Nickel aluminides containing a minimum of 15 % by weight aluminium, a maximum of 38 % by weight aluminium and at least one additional alloying element; 2. Titanium aluminides containing 10 % by weight or more aluminium and at least one additional alloying element. (b) Metal alloys made from the powder or particulate material including: 1. Nickel alloys having a stress-rupture life of 10 000 hours or longer at 650 °C at a stress of 676 MPa or a low cycle fatigue life of 10 000 cycles or more at 550 °C at a maximum stress of 1 095 MPa; 2. Niobium alloys having a stress-rupture life of 10 000 hours or longer at 800 °C at a stress of 400 MPa or a low cycle fatigue life of 10 000 cycles or more at 700 °C at a maximum stress of 700 MPa; 3. Titanium alloys having a stress-rupture life' of 10 000 hours or longer at 450 °C at a stress of 200 MPa or a low cycle fatigue life of 10 000 cycles or more at 450 °C at a maximum stress of 400 MPa; 4. Aluminium alloys having a tensile strength of 240 MPa or more at 200 °C or a tensile strength of 415 MPa or more at 25 °C; 5. Magnesium alloys having a tensile strength of 345 MPa or more and a corrosion rate of less than 1 mm/year in 3 % sodium chloride aqueous solution measured in accordance with ASTM standard G-31 or national equivalents; 6. Metal alloy powder or particulate material, having all of the following and made from any of the following composition systems: a. Nickel alloys (Ni-Al-X, Ni-X-Al) qualified for turbine engine parts or components, i.e. with less than 3 non-metallic particles (introduced during the manufacturing process) larger than 100 μm in 10 9 alloy particles b. Niobium alloys (Nb-Al-X or Nb-X-Al, Nb-Si-X or Nb-X-Si, Nb Ti X or Nb-X-Ti) c. Titanium alloys (Ti-Al-X or Ti-X-Al) d. Aluminium alloys (Al-Mg-X or Al-X-Mg, Al-Zn-X or Al-X-Zn, Al Fe-X or Al-X-Fe) or e. Magnesium alloys (Mg-Al-X or Mg-X-Al) 7. Made in a controlled environment by any of the following processes: a. ‘Vacuum atomization’ b. ‘Gas atomization’ c. ‘Rotary atomization’ d. ‘Splat quenching’ e. ‘Melt spinning and comminution’ Note: Unless provision to the contrary is made, the words ‘metals’ and ‘alloys’ cover crude and semi-fabricated forms. Crude forms: anodes, balls, bars (including notched bars and wire bars), billets, blocks, blooms, brickets, cakes, cathodes, crystals, cubes, dice, grains, granules, ingots, lumps, pellets, pigs, powder, rondelles, shot, slabs, slugs, sponge, sticks. Semi-fabricated forms: Wrought or worked materials fabricated by rolling, drawing, extruding, forging, impact extruding, pressing, graining, atomising, and grinding, i.e.: angles, channels, circles, discs, dust, flakes, foils and leaf, forging, plate, powder, pressings and stampings, ribbons, rings, rods (including bare welding rods, wire rods, and rolled wire), sections, shapes, sheets, strip, pipe and tubes (including tube rounds, squares, and hollows), drawn or extruded wire. Cast material produced by casting in sand, die, metal, plaster or other types of moulds, including high pressure castings, sintered forms, and forms made by powder metallurgy.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.004
Code: 1C002
Metal alloys, metal alloy powder and alloyed materials including the following: (a) Aluminides, including: 1. Nickel aluminides containing a minimum of 15 % by weight aluminium, a maximum of 38 % by weight aluminium and at least one additional alloying element; 2. Titanium aluminides containing 10 % by weight or more aluminium and at least one additional alloying element. (b) Metal alloys made from the powder or particulate material including: 1. Nickel alloys having a stress-rupture life of 10 000 hours or longer at 650 °C at a stress of 676 MPa or a low cycle fatigue life of 10 000 cycles or more at 550 °C at a maximum stress of 1 095 MPa; 2. Niobium alloys having a stress-rupture life of 10 000 hours or longer at 800 °C at a stress of 400 MPa or a low cycle fatigue life of 10 000 cycles or more at 700 °C at a maximum stress of 700 MPa; 3. Titanium alloys having a stress-rupture life' of 10 000 hours or longer at 450 °C at a stress of 200 MPa or a low cycle fatigue life of 10 000 cycles or more at 450 °C at a maximum stress of 400 MPa; 4. Aluminium alloys having a tensile strength of 240 MPa or more at 200 °C or a tensile strength of 415 MPa or more at 25 °C; 5. Magnesium alloys having a tensile strength of 345 MPa or more and a corrosion rate of less than 1 mm/year in 3 % sodium chloride aqueous solution measured in accordance with ASTM standard G-31 or national equivalents; 6. Metal alloy powder or particulate material, having all of the following and made from any of the following composition systems: a. Nickel alloys (Ni-Al-X, Ni-X-Al) qualified for turbine engine parts or components, i.e. with less than 3 non-metallic particles (introduced during the manufacturing process) larger than 100 μm in 10 9 alloy particles b. Niobium alloys (Nb-Al-X or Nb-X-Al, Nb-Si-X or Nb-X-Si, Nb Ti X or Nb-X-Ti) c. Titanium alloys (Ti-Al-X or Ti-X-Al) d. Aluminium alloys (Al-Mg-X or Al-X-Mg, Al-Zn-X or Al-X-Zn, Al Fe-X or Al-X-Fe) or e. Magnesium alloys (Mg-Al-X or Mg-X-Al) 7. Made in a controlled environment by any of the following processes: a. ‘Vacuum atomization’ b. ‘Gas atomization’ c. ‘Rotary atomization’ d. ‘Splat quenching’ e. ‘Melt spinning and comminution’ Note: Unless provision to the contrary is made, the words ‘metals’ and ‘alloys’ cover crude and semi-fabricated forms. Crude forms: anodes, balls, bars (including notched bars and wire bars), billets, blocks, blooms, brickets, cakes, cathodes, crystals, cubes, dice, grains, granules, ingots, lumps, pellets, pigs, powder, rondelles, shot, slabs, slugs, sponge, sticks. Semi-fabricated forms: Wrought or worked materials fabricated by rolling, drawing, extruding, forging, impact extruding, pressing, graining, atomising, and grinding, i.e.: angles, channels, circles, discs, dust, flakes, foils and leaf, forging, plate, powder, pressings and stampings, ribbons, rings, rods (including bare welding rods, wire rods, and rolled wire), sections, shapes, sheets, strip, pipe and tubes (including tube rounds, squares, and hollows), drawn or extruded wire. Cast material produced by casting in sand, die, metal, plaster or other types of moulds, including high pressure castings, sintered forms, and forms made by powder metallurgy.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.004
Code: 1C002
Equipment for the ‘production’ or inspection of ‘composite’ structures Specially designed components and accessories to include: (a) Filament winding machines, of which the motions for positioning, wrapping and winding fibres are coordinated and programmed in three or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ structures or laminates, from ‘fibrous or filamentary materials’. (b) ‘Tape-laying machines’, of which the motions for positioning and laying tape are coordinated and programmed in five or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ airframe or missile structures. (c) Multidirectional, multidimensional weaving machines or interlacing machines, including adapters and modification kits, specially designed or modified for weaving, interlacing or braiding fibres for ‘composite’ structures. (d) Equipment specially designed or adapted for the ‘production’ of reinforcement fibres, as follows: 1. Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon, pitch or polycarbosilane) into carbon fibres or silicon carbide fibres, including special equipment to strain the fibre during heating; 2. Equipment for the chemical vapor deposition of elements or compounds, on heated filamentary substrates, to manufacture silicon carbide fibres; 3. Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide); 4. Equipment for converting aluminium containing precursor fibres into alumina fibres by heat treatment; 5. Equipment for producing prepregs specified in VII.A1.003, paragraph ‘d’, under ‘Materials’, by the hot melt method; 6. Non-destructive inspection equipment specially designed for ‘composite’ materials, as follows: a. X-ray tomography systems for three dimensional defect inspection; b. Numerically controlled ultrasonic testing machines of which the motions for positioning transmitters or receivers are simultaneously coordinated and programmed in four or more axes to follow the three dimensional contours of the component under inspection. Notes: 1. For the purposes of this ‘tape-laying machines’ have the ability to lay one or more ‘filament bands’ limited to widths greater than 25 mm and less than or equal to 305 mm, and to cut and restart individual ‘filament band’ courses during the laying process. 2. The technique of interlacing includes knitting.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.003
Code: 1B201
Equipment for the ‘production’ or inspection of ‘composite’ structures Specially designed components and accessories to include: (a) Filament winding machines, of which the motions for positioning, wrapping and winding fibres are coordinated and programmed in three or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ structures or laminates, from ‘fibrous or filamentary materials’. (b) ‘Tape-laying machines’, of which the motions for positioning and laying tape are coordinated and programmed in five or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ airframe or missile structures. (c) Multidirectional, multidimensional weaving machines or interlacing machines, including adapters and modification kits, specially designed or modified for weaving, interlacing or braiding fibres for ‘composite’ structures. (d) Equipment specially designed or adapted for the ‘production’ of reinforcement fibres, as follows: 1. Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon, pitch or polycarbosilane) into carbon fibres or silicon carbide fibres, including special equipment to strain the fibre during heating; 2. Equipment for the chemical vapor deposition of elements or compounds, on heated filamentary substrates, to manufacture silicon carbide fibres; 3. Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide); 4. Equipment for converting aluminium containing precursor fibres into alumina fibres by heat treatment; 5. Equipment for producing prepregs specified in VII.A1.003, paragraph ‘d’, under ‘Materials’, by the hot melt method; 6. Non-destructive inspection equipment specially designed for ‘composite’ materials, as follows: a. X-ray tomography systems for three dimensional defect inspection; b. Numerically controlled ultrasonic testing machines of which the motions for positioning transmitters or receivers are simultaneously coordinated and programmed in four or more axes to follow the three dimensional contours of the component under inspection. Notes: 1. For the purposes of this ‘tape-laying machines’ have the ability to lay one or more ‘filament bands’ limited to widths greater than 25 mm and less than or equal to 305 mm, and to cut and restart individual ‘filament band’ courses during the laying process. 2. The technique of interlacing includes knitting.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.003
Code: 1B201
Equipment for the ‘production’ or inspection of ‘composite’ structures Specially designed components and accessories to include: (a) Filament winding machines, of which the motions for positioning, wrapping and winding fibres are coordinated and programmed in three or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ structures or laminates, from ‘fibrous or filamentary materials’. (b) ‘Tape-laying machines’, of which the motions for positioning and laying tape are coordinated and programmed in five or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ airframe or missile structures. (c) Multidirectional, multidimensional weaving machines or interlacing machines, including adapters and modification kits, specially designed or modified for weaving, interlacing or braiding fibres for ‘composite’ structures. (d) Equipment specially designed or adapted for the ‘production’ of reinforcement fibres, as follows: 1. Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon, pitch or polycarbosilane) into carbon fibres or silicon carbide fibres, including special equipment to strain the fibre during heating; 2. Equipment for the chemical vapor deposition of elements or compounds, on heated filamentary substrates, to manufacture silicon carbide fibres; 3. Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide); 4. Equipment for converting aluminium containing precursor fibres into alumina fibres by heat treatment; 5. Equipment for producing prepregs specified in VII.A1.003, paragraph ‘d’, under ‘Materials’, by the hot melt method; 6. Non-destructive inspection equipment specially designed for ‘composite’ materials, as follows: a. X-ray tomography systems for three dimensional defect inspection; b. Numerically controlled ultrasonic testing machines of which the motions for positioning transmitters or receivers are simultaneously coordinated and programmed in four or more axes to follow the three dimensional contours of the component under inspection. Notes: 1. For the purposes of this ‘tape-laying machines’ have the ability to lay one or more ‘filament bands’ limited to widths greater than 25 mm and less than or equal to 305 mm, and to cut and restart individual ‘filament band’ courses during the laying process. 2. The technique of interlacing includes knitting.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.003
Code: 1B101
Equipment for the ‘production’ or inspection of ‘composite’ structures Specially designed components and accessories to include: (a) Filament winding machines, of which the motions for positioning, wrapping and winding fibres are coordinated and programmed in three or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ structures or laminates, from ‘fibrous or filamentary materials’. (b) ‘Tape-laying machines’, of which the motions for positioning and laying tape are coordinated and programmed in five or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ airframe or missile structures. (c) Multidirectional, multidimensional weaving machines or interlacing machines, including adapters and modification kits, specially designed or modified for weaving, interlacing or braiding fibres for ‘composite’ structures. (d) Equipment specially designed or adapted for the ‘production’ of reinforcement fibres, as follows: 1. Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon, pitch or polycarbosilane) into carbon fibres or silicon carbide fibres, including special equipment to strain the fibre during heating; 2. Equipment for the chemical vapor deposition of elements or compounds, on heated filamentary substrates, to manufacture silicon carbide fibres; 3. Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide); 4. Equipment for converting aluminium containing precursor fibres into alumina fibres by heat treatment; 5. Equipment for producing prepregs specified in VII.A1.003, paragraph ‘d’, under ‘Materials’, by the hot melt method; 6. Non-destructive inspection equipment specially designed for ‘composite’ materials, as follows: a. X-ray tomography systems for three dimensional defect inspection; b. Numerically controlled ultrasonic testing machines of which the motions for positioning transmitters or receivers are simultaneously coordinated and programmed in four or more axes to follow the three dimensional contours of the component under inspection. Notes: 1. For the purposes of this ‘tape-laying machines’ have the ability to lay one or more ‘filament bands’ limited to widths greater than 25 mm and less than or equal to 305 mm, and to cut and restart individual ‘filament band’ courses during the laying process. 2. The technique of interlacing includes knitting.
Authority: EU
Prohibited Supply To: IRKP
Program: KP
EU Code: VII.A1.003
Code: 1B101

Search sanctioned goods across UK and EU export control lists in one place. This tool covers dual-use items, military equipment, and other restricted goods and technologies. Each entry includes the specific goods description, issuing authority, countries subject to import or export restrictions, and the relevant sanctions programme. This helps compliance and trade teams determine whether an item is subject to import or export prohibitions.

Use the filters to narrow results by authority, target state, or sanctions programme. Whether you’re checking a single HS code or reviewing an entire category, the sanctioned goods list is updated as new designations and programme consolidated changes are published.

Goods search

Search results

‘Magnetic gradiometers’ using multiple ‘magnetometers’ specified in VII.A6;

‘Magnetic gradiometers’ using multiple ‘magnetometers’ specified in VII.A6;

‘Magnetometers’ using optically pumped or nuclear precession (proton/Overhauser) ‘technology’ having a ‘sensitivity’ lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz;

‘Magnetometers’ using optically pumped or nuclear precession (proton/Overhauser) ‘technology’ having a ‘sensitivity’ lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz;

Unprocessed fluorinated compounds as follows: (a) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (b) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine.

Unprocessed fluorinated compounds as follows: (a) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (b) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine.

Uranium titanium alloys or tungsten alloys with a ‘matrix’ based on iron, nickel or copper, having all of the following: (a) A density exceeding 17,5 g/cm 3 ; (b) An elastic limit exceeding 880 MPa; (c) An ultimate tensile strength exceeding 1 270 MPa; and (d) An elongation exceeding 8 %.

Uranium titanium alloys or tungsten alloys with a ‘matrix’ based on iron, nickel or copper, having all of the following: (a) A density exceeding 17,5 g/cm 3 ; (b) An elastic limit exceeding 880 MPa; (c) An ultimate tensile strength exceeding 1 270 MPa; and (d) An elongation exceeding 8 %.

Filters

Search results

‘Magnetic gradiometers’ using multiple ‘magnetometers’ specified in VII.A6;

‘Magnetic gradiometers’ using multiple ‘magnetometers’ specified in VII.A6;

‘Magnetometers’ using optically pumped or nuclear precession (proton/Overhauser) ‘technology’ having a ‘sensitivity’ lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz;

‘Magnetometers’ using optically pumped or nuclear precession (proton/Overhauser) ‘technology’ having a ‘sensitivity’ lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz;

Unprocessed fluorinated compounds as follows: (a) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (b) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine.

Unprocessed fluorinated compounds as follows: (a) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (b) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine.

Uranium titanium alloys or tungsten alloys with a ‘matrix’ based on iron, nickel or copper, having all of the following: (a) A density exceeding 17,5 g/cm 3 ; (b) An elastic limit exceeding 880 MPa; (c) An ultimate tensile strength exceeding 1 270 MPa; and (d) An elongation exceeding 8 %.

Uranium titanium alloys or tungsten alloys with a ‘matrix’ based on iron, nickel or copper, having all of the following: (a) A density exceeding 17,5 g/cm 3 ; (b) An elastic limit exceeding 880 MPa; (c) An ultimate tensile strength exceeding 1 270 MPa; and (d) An elongation exceeding 8 %.