10K+ items found
Search results
Aluminium electrolytic capacitors
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8532 22Aluminium electrolytic capacitors
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8532 22Tantalum capacitors
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8532 21Tantalum capacitors
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8532 21RF filters or Electromagnetic Interference (EMI) filters
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8548 00RF filters or Electromagnetic Interference (EMI) filters
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8548 00‘Monolithic Microwave Integrated Circuits’ (‘MMIC’) amplifiers and devices
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8543 70 02‘Monolithic Microwave Integrated Circuits’ (‘MMIC’) amplifiers and devices
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8543 70 02‘Monolithic Microwave Integrated Circuits’ (‘MMIC’) amplifiers and devices
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8542 33‘Monolithic Microwave Integrated Circuits’ (‘MMIC’) amplifiers and devices
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8542 33Integrated circuits as follows: Field Programable Gate Array (FPGA), microcontrollers, microprocessors, signal processors, signal analysers, Analogue-to-Digital Converters (ADC), voltage regulators, video encoders and DC-DC converters
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8542 39Integrated circuits as follows: Field Programable Gate Array (FPGA), microcontrollers, microprocessors, signal processors, signal analysers, Analogue-to-Digital Converters (ADC), voltage regulators, video encoders and DC-DC converters
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8542 39Integrated circuits as follows: Field Programable Gate Array (FPGA), microcontrollers, microprocessors, signal processors, signal analysers, Analogue-to-Digital Converters (ADC), voltage regulators, video encoders and DC-DC converters
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8542 31Integrated circuits as follows: Field Programable Gate Array (FPGA), microcontrollers, microprocessors, signal processors, signal analysers, Analogue-to-Digital Converters (ADC), voltage regulators, video encoders and DC-DC converters
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8542 31‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 60‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 60‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 59‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 59‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 58‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 58‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 57‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 57‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 56‘Numerical controlled’ machine tools, having one or more linear axis with a travel length greater than 8 000 mm.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 84 56Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 93Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
High priorityAuthority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 93Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRProgram: IRCode: 8466 30Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRProgram: IRCode: 8466 30Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 20 98Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 20 98Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 20 91Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 20 91Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 20 20Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 20 20Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 10Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRBYRUProgram: IRCode: 8466 10Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRProgram: IRCode: 8207 90Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRProgram: IRCode: 8207 90Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRProgram: IRCode: 8207 60Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex: a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (‘run-out’) or axial (‘camming’) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); b. Single point diamond cutting tool inserts, having all of the following characteristics: 1. Flawless and chip-free cutting edge when magnified 400 times in any direction; 2. Cutting radius from 0,1 to 5 mm inclusive; and 3. Cutting radius out-of-roundness less (better) than 0,002 mm TIR. c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, ‘numerical control’ units, machine tools or feed-back devices to or above the levels specified in this Annex. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.
Authority: EUProhibited Supply To: IRProgram: IRCode: 8207 60