Code

EU Code

Category

Subcategory

Prohibited Supply To

Authority

Document

Notes

• High Quantum Efficiency (QE) photodetectors with a QE greater than 80 % in the wavelength range exceeding 400 nm but not exceeding 1600 nm
• Equipment specially designed for the inspection or testing of electron tubes, optical elements and specially designed components therefor controlled by 3A001 or X.A.I.001
• Seismic intrusion detection systems that detect, classify and determine the bearing on the source of a detected signal.
• Automated optical inspection equipment for testing Printed Circuit Boards (PCBs), based on optical or electrical sensors, and capable to detect any of the following quality defects: a. Spacing, area, volume or height; b. Bill boarding; c. Components (presence, absence, flipped, offset, polarity, or skew); d. Solder (bridging, insufficient solder joints); e. Leads (insufficient paste, lifting); f. Tombstoning; or g. Electrical (shorts, opens, resistance, capacitance, power, grid performance).

Goods

• 90 Radar systems, equipment and major components, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor, as follows: a. Airborne radar equipment, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor; b. ‘Space-qualified’‘laser’ radar or Light Detection and Ranging (LIDAR) equipment specially designed for surveying or for meteorological observation; c. Millimeter wave enhanced vision radar imaging systems specially designed for rotary wing aircraft and having all of the following: 1. Operates at a frequency of 94 GHz; 2. An average output power of less than 20 mW; 3. Radar beam width of 1 degree; and 4. Operating range equal to or greater than 1 500 m
• 9031 Measuring or checking instruments, appliances and machines not elsewhere specified in Chapter 90; profile projectors
• 9031 80 Testing equipment for aerospace and propulsion, and specially designed components therefor, other than those specified in the CML or in Regulation (EU) 2021/821. Note: this control includes the following items, and the related ‘software’: — Load release test bench and other facilities to simulate safe separation from the ‘aircraft’ or launch system. — Salt spray chambers for temperature and humidity ranges to perform oxidation tests. — Chambers to perform fungus tests. — Devices for acceleration, shock and transport shock tests. — Vibration chambers with altitude, temperature and humidity ranges. — Chambers for explosive decompression tests. — Chambers for temperature, humidity and solar radiation tests. — Devices to estimate the captured solar radiation for solar radiation tests. — Vibrators for sinusoidal, random and shock tests, combinable with altitude, temperature and humidity tests. — Vibration table for longitudinal and lateral tests combined with temperature chambers. — Overpressure chambers.