Code

EU Code

Category

Subcategory

Prohibited Supply To

Authority

Document

Notes

• Vibration test equipment and specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821.
• High Quantum Efficiency (QE) photodetectors with a QE greater than 80 % in the wavelength range exceeding 400 nm but not exceeding 1600 nm
• Automated optical inspection equipment for testing Printed Circuit Boards (PCBs), based on optical or electrical sensors, and capable to detect any of the following quality defects: a. Spacing, area, volume or height; b. Bill boarding; c. Components (presence, absence, flipped, offset, polarity, or skew); d. Solder (bridging, insufficient solder joints); e. Leads (insufficient paste, lifting); f. Tombstoning; or g. Electrical (shorts, opens, resistance, capacitance, power, grid performance).
• Automated equipment using non-mechanical methods for measuring airfoil wall thickness
• Equipment for seismological measurements, including reflection seismetics and seismic vibrators
• Dimensional inspection or measuring systems or equipment not controlled by 2B006 or 2B206, as follows: Manual dimensional inspection machines, having both of the following characteristics: a.1. Two or more axes; and a.2. A measurement uncertainty equal to or less (better) than (3 + L/300) micrometer in any axes (L measured length in mm).

Goods

• Radar systems, equipment and major components, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor, as follows: a. Airborne radar equipment, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor; b. ‘Space-qualified’‘laser’ radar or Light Detection and Ranging (LIDAR) equipment specially designed for surveying or for meteorological observation; c. Millimeter wave enhanced vision radar imaging systems specially designed for rotary wing aircraft and having all of the following: 1. Operates at a frequency of 94 GHz; 2. An average output power of less than 20 mW; 3. Radar beam width of 1 degree; and 4. Operating range equal to or greater than 1 500 m
• Measuring or checking instruments, appliances and machines not elsewhere specified in Chapter 90; profile projectors
• ‘Magnetometers’, ‘Superconductive’ electromagnetic sensors, and specially designed components therefor, as follows: a. ‘Magnetometers’, other than those specified in the CML or in Regulation (EU) 2021/821, having a ‘sensitivity’ lower (better) than 1,0 nT (rms) per square root Hz Technical Note: For the purposes of this control, ‘sensitivity’ (noise level) is the root mean square of the device-limited noise floor which is the lowest signal that can be measured b. ‘Superconductive’ electromagnetic sensors, components manufactured from ‘superconductive’ materials: 1. Designed for operation at temperatures below the ‘critical temperature’ of at least one of their ‘superconductive’ constituents (including Josephson effect devices or ‘superconductive’ quantum interference devices (SQUIDS)); 2. Designed for sensing electromagnetic field variations at frequencies of 1 kHz or less; and 3. Having any of the following characteristics: a. Incorporating thin-film SQUIDS with a minimum feature size of less than 2 μm and with associated input and output coupling circuits; b. Designed to operate with a magnetic field slew rate exceeding 1 x 10 6 magnetic flux quanta per second; c. Designed to function without magnetic shielding in the earth’s ambient magnetic field; or d. Having a temperature coefficient less (smaller) than 0,1 magnetic flux quantum/K