'Instruments, appliances and machines for measuring or checking geometrical quantities, n.e.s. in Chapter 90

Instruments, appliances and machines for measuring or checking geometrical quantities, n.e.s. in Chapter 90

Instruments, appliances and machines for measuring or checking geometrical quantities, n.e.s. in Ch 90

Other instruments, appliances and machines; For measuring or checking geometrical quantities

Other instruments, appliances and machines, for measuring or checking geometrical quantities

Automated optical inspection equipment for testing Printed Circuit Boards (PCBs), based on optical or electrical sensors, and capable to detect any of the following quality defects: a. Spacing, area, volume or height; b. Bill boarding; c. Components (presence, absence, flipped, offset, polarity, or skew); d. Solder (bridging, insufficient solder joints); e. Leads (insufficient paste, lifting); f. Tombstoning; or g. Electrical (shorts, opens, resistance, capacitance, power, grid performance).

Radar systems, equipment and major components, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor, as follows: a. Airborne radar equipment, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor; b. ‘Space-qualified’‘laser’ radar or Light Detection and Ranging (LIDAR) equipment specially designed for surveying or for meteorological observation; c. Millimeter wave enhanced vision radar imaging systems specially designed for rotary wing aircraft and having all of the following: 1. Operates at a frequency of 94 GHz; 2. An average output power of less than 20 mW; 3. Radar beam width of 1 degree; and 4. Operating range equal to or greater than 1 500 m

Measuring or checking instruments, appliances and machines not elsewhere specified in Chapter 90; profile projectors

Testing equipment for aerospace and propulsion, and specially designed components therefor, other than those specified in the CML or in Regulation (EU) 2021/821. Note: this control includes the following items, and the related ‘software’: — Load release test bench and other facilities to simulate safe separation from the ‘aircraft’ or launch system. — Salt spray chambers for temperature and humidity ranges to perform oxidation tests. — Chambers to perform fungus tests. — Devices for acceleration, shock and transport shock tests. — Vibration chambers with altitude, temperature and humidity ranges. — Chambers for explosive decompression tests. — Chambers for temperature, humidity and solar radiation tests. — Devices to estimate the captured solar radiation for solar radiation tests. — Vibrators for sinusoidal, random and shock tests, combinable with altitude, temperature and humidity tests. — Vibration table for longitudinal and lateral tests combined with temperature chambers. — Overpressure chambers.

Other instruments, appliances and machines, for measuring or checking geometrical quantities

Program information