“Software”, other than that specified in 2D002, as follows: a. “Software” specially designed or modified for the “development” or “production” of equipment specified in 2A001 or 2B001 b. “Software” specially designed or modified for the “use” of equipment specified in 2A001.c., 2B001 or 2B003 to 2B009. Note: 2D001 does not control part programming “software” that generates “numerical control” codes for machining various parts.

‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment specified in IX.A2

‘Software’ specially designed for the ‘development’ or ‘production’ of equipment as follows: (a) Machine tools for turning having two or more axes which can be coordinated simultaneously for ‘contouring control’ having any of the following: 1. ‘Unidirectional positioning repeatability’ equal to or less (better) than 0,9 μm along one or more linear axis with a travel length less than 1,0 m; or 2. ‘Unidirectional positioning repeatability’ equal to or less (better) than 1,1 μm along one or more linear axis with a travel length equal to or greater than 1,0 m. (b) Machine tools for milling having any of the following: 1. Three linear axes plus one rotary axis which can be coordinated simultaneously for ‘contouring control’ having any of the following: a. ‘Unidirectional positioning repeatability’ equal to or less (better) than 0,9 μm along one or more linear axis with a travel length less than 1,0 m; or b. ‘Unidirectional positioning repeatability’ equal to or less (better) than 1,1 μm along one or more linear axis with a travel length equal to or greater than 1,0 m. 2. Five or more axes which can be coordinated simultaneously for ‘contouring control’ having any of the following: a. ‘Unidirectional positioning repeatability’ equal to or less (better) than 0,9 μm along one or more linear axis with a travel length less than 1,0 m; b. ‘Unidirectional positioning repeatability’ equal to or less (better) than 1,4 μm along one or more linear axis with a travel length equal to or greater than 1 m and less than 4 m; c. ‘Unidirectional positioning repeatability’ equal to or less (better) than 6,0 μm along one or more linear axis with a travel length equal to or greater than 4 m; 3. A ‘unidirectional positioning repeatability’ for jig boring machines equal to or less (better) than 1,1 μm along one or more linear axis. 4. Electrical discharge machines of the non-wire type which have two or more rotary axes which can be coordinated simultaneously for ‘contouring control’. 5. Deep-hole-drilling machines and turning machines modified for deep-hole-drilling, having a maximum depth-of-bore capability exceeding 5 m. 6. ‘Numerically controlled’ or manual machine tools, and specially designed components, controls and accessories therefor, specially designed for the shaving, finishing, grinding or honing of hardened (Rc = 40 or more) spur, helical and double-helical gears with a pitch diameter exceeding 1 250 mm and a face width of 15 % of pitch diameter or larger finished to a quality of AGMA 14 or better (equivalent to ISO 1 328 class 3).

‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment specified in IX.A2

Program information