Pipes, piping, flanges, fittings made of, or lined with, nickel or nickel alloy containing more than 40 % nickel by weight, other than those specified in 2B350.h.1.

Batch centrifuges with a rotor capacity of 4 L or greater, usable with biological materials

Vacuum valves, piping, flanges, gaskets and related equipment specially designed for use in high-vacuum service (0,1 Pa or lower pressure)

Bellows-sealed valves other than those specified in 0B001.c.6., 2A226 or 2B350, made of aluminium alloy or stainless steel type 304, 304L or 316L.

Pipes, piping, flanges, fittings made of, or lined with nickel, or nickel alloy containing more than 40 % nickel by weight, other than those specified in 2B350.h.1.

Reaction vessels, reactors, agitators, heat exchangers, condensers, pumps, valves, storage tanks, containers, receivers, and distillation or absorption columns that meet performance parameters described in S/2006/853 and S/2006/853/corr.1 Single-seal pumps with manufacturer's specified maximum flow-rate greater than 0,6 m 3 /h and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials: (a) nickel or alloys with more than 40 % nickel by weight; (b) alloys with more than 25 % nickel and 20 % chromium by weight; (c) fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight); (d) glass or glass-lined (including vitrified or enamelled coating); (e) graphite or carbon-graphite; (f) tantalum or tantalum alloys; (g) titanium or titanium alloys; (h) zirconium or zirconium alloys; (i) ceramics; (j) ferrosilicon (high silicon iron alloys); or (k) niobium (columbium) or niobium alloys.

Monel equipment, including valves, piping, tanks and vessels (pipes and valves greater than 8-in diameter and rated for 500 psi and tanks greater than 500 l)

Open tanks or containers, with or without agitators, with a total internal (geometric) volume greater than 0,5 m 3 (500 litres), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials: a. Alloys with more than 25 % nickel and 20 % chromium by weight; b. Fluoropolymers; c. Glass (including vitrified or enamelled coatings or glass lining); d. Nickel or alloys with more than 40 % nickel by weight; e. Tantalum or tantalum alloys; f. Titanium or titanium alloys; g. Zirconium or zirconium alloys; h. Niobium (columbium) or niobium alloys; i. Stainless steel; j. Wood; or k. Rubber. Technical note : The term ‘rubber’ encompasses all kinds of natural and synthetic rubbers.

Equipment and reagents, other than those specified in 2B350 or 2B352, as follows: a. Fermenters capable of cultivation of pathogenic ‘micro-organisms’ or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more; b. Agitators for fermenters as mentioned in a. above; Technical Note : Fermenters include bioreactors, chemostats and continuous-flow systems. c. Laboratory equipment as follows: 1. Polymerase chain reaction (PCR)-equipment 2. Genetic sequencing equipment; 3. Genetic synthesizers; 4. Electroporation equipment; 5. Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above; d. Filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects; e. Ultracentrifuges, rotors and adaptors for ultracentrifuges; f. Freeze drying equipment.

Vacuum valves, piping, flanges, gaskets and related equipment specially designed for use in high-vacuum service (0,1 Pa or lower pressure)

Program information