Code

EU Code

Category

Subcategory

Prohibited Supply To

Authority

Document

Date of Delisting

Notes

• d. Systems for simultaneous linear-angular inspection of hemishells, having both of the following characteristics: 1. “Measurement uncertainty” along any linear axis equal to or better (less) than 3,5 μm per 5 mm; and 2. “Angular position deviation” equal to or less than 0,02°.
• a. Computer controlled or numerically controlled coordinate measuring machines (CMM) having either of the following characteristics: 1. Having only two axes and having a maximum permissible error of length measurement along any axis (one dimensional), identified as any combination of E 0x MPE , E 0y MPE or E 0zMPE , equal to or less(better) than (1,25 + L/1 000 ) μm (where L is the measured length in mm) at any point within the operating range of the machine (i.e., within the length of the axis), according to ISO 10360-2(2009); or 2. Three or more axes and having a three dimensional (volumetric) maximum permissible error of length measurement (E 0, MPE equal to or less (better) than (1,7 + L/800) μm (where L is the measured length in mm) at any point within the operating range of the machine (i.e., within the length of the axis), according to ISO 10360-2(2009). Technical Note: The E 0, MPE of the most accurate configuration of the CMM specified according to ISO 10360-2(2009) by the manufacturer (e.g., best of the following: probe, stylus length, motion parameters, environment) and with all compensations available shall be compared to the 1,7 + L/ 800 μm threshold.