Code

EU Code

Categories

• ANNEX I - CATEGORY 1 — SPECIAL MATERIALS AND RELATED EQUIPMENT
• ANNEX II - List of other goods and technology, including software, referred to in Article 3a

Subcategory

Prohibited Supply To

Authority

Document

Notes

• Glass “fibrous or filamentary materials” having both of the following characteristics:1. A “specific modulus” of 3,18 × 106m or greater; and2. A “specific tensile strength” of 7,62 × 104m or greater;
• c. Thermoset resin impregnated continuous “yarns”, “rovings”, “tows” or “tapes” with a width of 15 mm or less (prepregs), made from carbon or glass “fibrous or filamentary materials” specified in Item 2.C.7.a. or Item 2.C.7.b.Technical Note:The resin forms the matrix of the composite.Technical Notes:1. In Item 2.C.7. “Specific modulus” is the Young's modulus in N/m2divided by the specific weight in N/m3when measured at a temperature of 296 ± 2 K (23 ± 2 °C) and a relative humidity of 50 ± 5 %.2. In Item 2.C.7. “Specific tensile strength” is the ultimate tensile strength in N/m2divided by the specific weight in N/m3when measured at a temperature of 296 ± 2 K (23 ± 2 °C) and a relative humidity of 50 ± 5 %.
• “Fibrous or filamentary materials”, and prepregs, as follows: a. Carbon or aramid “fibrous or filamentary materials” having either of the following characteristics: 1. A “specific modulus” of 12,7 × 10 6 m or greater; or 2. A “specific tensile strength” of 23,5 × 10 4 m or greater; Note: Item 2.C.7.a. does not control aramid “fibrous or filamentary materials” having 0,25 % or more by weight of an ester based fiber surface modifier.