Good

Last Updated: June 13, 2026

‘Fibrous or filamentary materials’ or prepregs, other than those specified in 1C010.a., 1C010.b., 1C210.a. or 1C210.b., as follows: a. Aramid ‘fibrous or filamentary materials’ having either of the following characteristics: 1. A ‘specific modulus’ exceeding 10 × 10 6 m; or 2. A ‘specific tensile strength’ exceeding 17 × 10 4 m; b. Glass ‘Gfibrous or filamentary materials’ having either of the following characteristics: 1. A ‘specific modulus’ exceeding 3,18 × 10 6 m; or 2. A ‘specific tensile strength’ exceeding 76,2 × 10 3 m; c. Thermoset resin-impregnated continuous ‘yarns’, ‘rovings’, ‘tows’ or ‘tapes’ with a width of 15 mm or less (once prepregs), made from glass ‘fibrous or filamentary materials’ other than those specified in I.A1.010.a. below; d. Carbon ‘fibrous or filamentary materials’; e. Thermoset resin-impregnated continuous ‘yarns’, ‘rovings’, ‘tows’, or ‘tapes’, made from carbon ‘fibrous or filamentary materials’; f. Polyacrylonitrile (PAN) continuous ‘yarns’, ‘rovings’, ‘tows’ or ‘tapes’; g. Para-aramid ‘fibrous or filamentary materials’ (Kevlar® and other Kevlar®-like fibres).

Code

1C010

EU Code

II.A1.009

Categories

  • ANNEX II - Goods and technology referred to in Articles 2(1), 2(2) and 2(4), 3(3), 5(1), 8(4), 17(2), 31(1) and 45
  • ANNEX III - CATEGORY 1 — SPECIAL MATERIALS AND RELATED EQUIPMENT

Subcategory

A1. Materials, chemicals, ‘microorganisms’ and ‘toxins’

Prohibited Supply To

IR

Authority

EU

Document

EU Regulation No 267/2012

Note

Resin impregnated fibre prepregs and metal coated fibre preforms, for the goods specified in 6.A.1., made either with organic matrix or metal matrix utilising fibrous or filamentary reinforcements having a specific tensile strength greater than 7,62 × 104 m and a specific modulus greater than 3,18 × 106 m.Note:The only resin impregnated fibre prepregs specified in 6.C.1. are those using resins with a glass transition temperature (Tg), after cure, exceeding 145 °C as determined by ASTM D4065 or national equivalents.Technical Notes:1.In Item 6.C.1. ‘specific tensile strength’ is the ultimate tensile strength in N/m2divided by the specific weight in N/m3, measured at a temperature of (296 ± 2)K ((23 ± 2)°C) and a relative humidity of (50 ± 5)%.2.In Item 6.C.1. ‘specific modulus’ is the Young's modulus in N/m2divided by the specific weight in N/m3, measured at a temperature of (296 ± 2)K ((23 ± 2)°C) and a relative humidity of (50 ± 5)%.

Program information

Program information

Have feedback, suggestions or need help navigating sanctions? Let's talk.

Let's discuss how Sanctions Finder can support you or your business or organization.